Home  >  Products  >  Proximity Card Reader  >  EM Proximity Card Reader  >  EM Card Reader HM8003

EM Card Reader HM8003

Products Information

proximity card reader HM8003 was designed with 125KHz  AM modulation RFID  technology,  can read EM 4100 or compatible RFID card  serial number (such as thin card, thick card and fobtag.) using common Wiegand26 interface or others  as per customer's request. HM8003 is with prominent customer logo by flashing the green(customerize color is acceptable) backlight LED.

Model Name: HM8003

Red: Power 9-15V
Black: Power ground
Green: Wiegand output D0
White: Wiegand output D1
Blue:  LED control
Yellow: Buzzer control


Dimension 80*43*13mm
Power requirement 9-15VDC at 100mA, A linear regulator is recommended
Support card All 125kHz EM ID or compatible proximity cards and fobtags.
Interface Weigand
Read range 5 - 10cm
Frequency 122-128KHz
Operating temperature -30°C  to  +60°C
Operating humidity 5%-95%  (non-condensing)
Audio/Visual Indication Green backlight LED and Buzzer signal output
Response Time Less than 0.2 seconds
Cable length 250mm
Weight 60gram

LED/Buzzer function description

LED function: When power on the reader, Green backlight LED will start to flash to make the customer logo very prominent. When a RFID proximity card or EM compatible card is presented to the reader, the LED will stop flashing and keeps on shortly to indicate the card is detected properly. When LED control line is actived by access control host or connect to ground, the LED stop flashing and keeps on alrways till the control line is released.
Beeper Function: When Power up the reader, Beeper will ring 2 times. When put RFID cards close to the reader, a short beep will be emitted. This indicates that card was read properly. 
Buzzer control line
When this control line is actived to lower by access controller host or connect to Ground line, buzzer will kepp ringing untill the line is released. 
customer logo and color is acceptale
  • Email :
chat online

Taylor (Jacky.zhang.skype)