Home  >  Products  >  Proximity Card Reader  >  Proximity Reader -G 125K  >  Proximity Card Reader HM6016 -G

Proximity Card Reader HM6016 -G

Products Information

HM6016 is desinged with 125KHz FM modulation RFID technology, it reads GE ProxLite or compatible proximity card . Can read GE standard 125KHz proximity card serial number (such as GE ProxLite ISO card, GE ProxLite clamshell card or GE FOB tag etc) and transmits the proximity card number to access controller host by wiegand 40 interface.

Model Name: HM6016

Red: Power 5-16V
Black: Power ground
Green: Wiegand output D0
White: Wiegand output D1
Brown: Green LED control
Blue: Buzzer control
Yellow: Hold


Power requirements 5-16VDC at 100mA, A linear regulator is recommended
Support card 125kHz GE proximity
Interface Weigand 40
Reader range 5 - 10cm
Frequency 122-128KHz
Operation temperature -30°C to +60°C
Operationg humidity 5%-95% (non-condensing)
Audio/Visual Indication Green & Red and Buzzer signal output
Response Time Less than 0.2 seconds
Dimension 121mm*46mm*22mm
Cable length 250mm
Weight 200gram


LED/Buzzer function description

LED function: The LED color is normally in RED. It starts with 2 green flashes and will keep RED. When proximity cards close to the reader, LED will  flash green momentarily, this indicates cards were read properly. When LED control signal is actived by access controller host, LED will changes to green.
Beeper Function: When power up the reader, Beeper will ring 2 times. When put GE cards close to the reader, a short beep will be emited. which indicates the card was read properly. When the Buzzer control signal is actived by access controller, the buzzer will keep ringing  until buzzer control line is released.
Hold function: When this line is actived to lower by access controller or connect to ground, the reader will stop reading cards until be released.


  • Email :
chat online

Taylor (Jacky.zhang.skype)